TDS RELIC CLEAR
Fast drying quality two component polyurethane clearcoat.Developed for spot repair and undertaking block repairs. Good hardness, good weather resistance with good film appearance. |
||
| Relic Clear (part A) : HW-41100
Hardener (part B) : Hardener RC HD-4110 |
||
| Packing size :
Part A : 800 ml Part B : 200 ml |
||
| Mixing ratio * | Viscosity | Pot Life |
 |
 |
 |
|
4 : 1 (by volume) |
13.6 sec DIN 4
(Part A + Part B) |
2-3 hours |
| Hardness pendulum day 7 on pot | Spray Viscosity | Spray Nozzle |
 |
 |
 |
| 76 (osc,konig) | 13 sec NK2 @ 25˚C | 1.3-1.4 |
| Spray pressure | Number of Coat | Total film build |
 |
 |
 |
| 2.0 – 3.0 BAR | 2 Coats | 35-45 µm |
| Tack free | Dry for polishing | Perfect Dry |
 |
 |
|
| 25 minutes @ 30˚C | 2 hours @ 30˚C | 2 Days @ 30˚C |
Notes: |
||
| The above info is based on laboratory condition and it may vary depending on different climate and environmental condition.
* Without thinner (ready to use) or if you want to add, use max 40 ml Medium Reducer |
||
TDS ULTIMATE CLEAR
Fast drying quality two component polyurethane clearcoat.Developed for spot repair and undertaking block repairs. Good hardness, good weather resistance with good film appearance. |
||
| Ultimate Clear (part A) : HW-41100
Hardener (part B) : Hardener 414 HD-4140 |
||
| Packing size :
Part A : 800 ml Part B : 200 ml |
||
| Mixing ratio * | Viscosity | Pot Life |
|
|
|
|
4 : 1 (by volume) |
61.2 sec DIN 4
(Part A + Part B) |
4-5 hours |
| Hardness pendulum day 7 on pot | Spray Viscosity | Spray Nozzle |
|
|
|
| 74 (osc,konig) | 11.9 sec NK2 @ 25˚C (+800ml thinner) | 1.3-1.4 |
| Spray pressure | Number of Coat | Total film build |
|
|
|
| 2.0 – 3.0 BAR | 2 Coats | 40-50 µm |
| Tack free | Dry for polishing | Perfect Dry |
|
|
|
| 30 minutes @ 30˚C | 3 hours @ 30˚C | 2 Days @ 30˚C |
Notes: |
||
| The above info is based on laboratory condition and it may vary depending on different climate and environmental condition.
* Use max 800 ml Medium Reducer |
||